Descrizione
Polymaker for Production is a product line designed for heavy 3D printing users.
We offer large spools, bulk pricing and high consistency batch to batch quality.
Matte PLA is a cost-effective PLA displaying the most important features to produce end products:
- Matte surface for a smooth high quality print finish
- Weather resistance, on par with ASA
- Chemical resistance to all main solvents
- Food safe filament as a first step to certify your final products
With all these features combined, Matte PLA is the ideal material for end use products which will be used in real world conditions: weather resistance, chemical resistance and the filament has already passed the food safety tests.
We tested the impact of accelerated weathering on the following mechanical properties:
- Tensile Strength
- Young's Modulus
- Charpy Impact Strength
Accelerated Weathering settings:
The fluorescent UV light exposure follows the standard ISO 4892.3
The type of UV light is UVA-340.
The irradiance is 0.76W/m2 at 340 nm.
The cycle is 102 min for UV only and 18 min for water spray.
The black panel temperature is 63± 3 °C
The total test time is 60days (720 cycles) equivalent to ~3+ years*
*BY MICOM LABORATORIES:
[Rule of thumb: acceleration factor was found to be: 21.5]
Reference standard: ISO 175:2010
Methods of test for the determination of the effects of immersion in liquid chemicals
- Immersion temperature: 23±2˚C
- Immersion period: 7 days
- Test the mechanical properties before and after immersion
- Resistance to the chemical: The mechanical properties* must maintain over 70% after 7 days immersion
*Tensile Strength, Young's Modulus and Charpy Impact Strength
Tested Liquid Chemicals:
- Water (pH=7) -> Result: RESISTANT
- Household cleaners (stain remover) (pH=11) -> Result: RESISTANT
- Household cleaners (sterilizer) (pH=4) -> Result: RESISTANT
- Vinegar food grade (pH=4) -> Result: RESISTANT
- Vinegar concentrate (pH=4) -> Result: RESISTANT
- 75% alcohol (pH=6) -> Result: RESISTANT
- Fertilizer nutrient solution (pH=6) -> Result: RESISTANT
Regulation (EC) No 1935/2004 of the European Parliament and of the Council of 27 October 2004 - Sensorial examination odour and taste test: PASS
Test Method: With reference to DIN 10955: 2004
(EU) No 10/2011 and its amendment (EU) 2020/1245 Regulation - Specific migration of heavy metal: PASS
Test Method: With reference to EN13130-1:2004, analysis was performed by ICP-OES and ICP-MS.
2.5kg cardboard spool:
Spool Inner Hole Diameter: 55±1mm
Spool Diameter: 250±2mm
Spool Width: 107.2±2mm
Spool Weight: 370±20g
Printing Temperature: 200˚C - 230˚C
Bed Temperature: 25˚C - 60˚C
Printing Speed: 60mm/s - 150mm/s
Fan: ON
Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Drying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)
We recommend a hardened nozzle for heavy use.
Spedizione
Sì, spediamo in tutto il mondo. Si applicheranno i costi di spedizione e verranno aggiunti al momento del pagamento. Gestiamo sconti e promozioni tutto l'anno, quindi rimanete sintonizzati per offerte esclusive.
Dipende da dove ti trovi. Gli ordini elaborati qui richiederanno 5-7 giorni lavorativi per arrivare. Le consegne all'estero possono richiedere da 7-16 giorni. I dettagli di consegna saranno forniti nella tua email di conferma.
Usiamo tutti i principali operatori e partner di corriere locali. Ti verrà chiesto di selezionare un metodo di consegna durante il checkout.
Prodotto
Miriamo sempre ad assicurarci che i nostri clienti adorino i nostri prodotti, ma se hai bisogno di restituire un ordine, siamo felici di aiutarti. Basta inviarci un'e -mail direttamente e ti faremo attraverso il processo.
Yes, we offer bulk discounts if you order multiple of 10 (box) or 500 (pallet).
Qualche domanda?
Se non abbiamo ancora risposto alla tua domanda, puoi contattarci di seguito e ti torneremo il prima possibile.