Beschreibung
Polymaker for Production is a product line designed for heavy 3D printing users.
We offer large spools, bulk pricing and high consistency batch to batch quality.
Matte PLA is a cost-effective PLA displaying the most important features to produce end products:
- Matte surface for a smooth high quality print finish
- Weather resistance, on par with ASA
- Chemical resistance to all main solvents
- Food safe filament as a first step to certify your final products
With all these features combined, Matte PLA is the ideal material for end use products which will be used in real world conditions: weather resistance, chemical resistance and the filament has already passed the food safety tests.
We tested the impact of accelerated weathering on the following mechanical properties:
- Tensile Strength
- Young's Modulus
- Charpy Impact Strength
Accelerated Weathering settings:
The fluorescent UV light exposure follows the standard ISO 4892.3
The type of UV light is UVA-340.
The irradiance is 0.76W/m2 at 340 nm.
The cycle is 102 min for UV only and 18 min for water spray.
The black panel temperature is 63± 3 °C
The total test time is 60days (720 cycles) equivalent to ~3+ years*
*BY MICOM LABORATORIES:
[Rule of thumb: acceleration factor was found to be: 21.5]
Reference standard: ISO 175:2010
Methods of test for the determination of the effects of immersion in liquid chemicals
- Immersion temperature: 23±2˚C
- Immersion period: 7 days
- Test the mechanical properties before and after immersion
- Resistance to the chemical: The mechanical properties* must maintain over 70% after 7 days immersion
*Tensile Strength, Young's Modulus and Charpy Impact Strength
Tested Liquid Chemicals:
- Water (pH=7) -> Result: RESISTANT
- Household cleaners (stain remover) (pH=11) -> Result: RESISTANT
- Household cleaners (sterilizer) (pH=4) -> Result: RESISTANT
- Vinegar food grade (pH=4) -> Result: RESISTANT
- Vinegar concentrate (pH=4) -> Result: RESISTANT
- 75% alcohol (pH=6) -> Result: RESISTANT
- Fertilizer nutrient solution (pH=6) -> Result: RESISTANT
Regulation (EC) No 1935/2004 of the European Parliament and of the Council of 27 October 2004 - Sensorial examination odour and taste test: PASS
Test Method: With reference to DIN 10955: 2004
(EU) No 10/2011 and its amendment (EU) 2020/1245 Regulation - Specific migration of heavy metal: PASS
Test Method: With reference to EN13130-1:2004, analysis was performed by ICP-OES and ICP-MS.
2.5kg cardboard spool:
Spool Inner Hole Diameter: 55±1mm
Spool Diameter: 250±2mm
Spool Width: 107.2±2mm
Spool Weight: 370±20g
Printing Temperature: 200˚C - 230˚C
Bed Temperature: 25˚C - 60˚C
Printing Speed: 60mm/s - 150mm/s
Fan: ON
Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Drying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)
We recommend a hardened nozzle for heavy use.
Versand
Ja, wir versenden auf der ganzen Welt. Die Versandkosten gelten und werden an der Kasse hinzugefügt. Wir führen das ganze Jahr über Rabatte und Werbeaktionen aus. Bleiben Sie also für exklusive Angebote auf dem Laufenden.
Es hängt davon ab, wo Sie sind. Die hier bearbeiteten Bestellungen dauern 5-7 Werktage. Übersee-Lieferungen können zwischen 7 und 16 Tagen dauern. Lieferdetails finden Sie in Ihrer Bestätigungs -E -Mail.
Wir verwenden alle wichtigen Fluggesellschaften und lokalen Kurierpartner. Sie werden gebeten, während der Kasse eine Liefermethode auszuwählen.
Produkt
Wir wollen immer sicherstellen, dass unsere Kunden unsere Produkte lieben, aber wenn Sie eine Bestellung zurückgeben müssen, helfen wir gerne gerne. Senden Sie uns einfach direkt per E -Mail und wir führen Sie durch den Prozess.
Yes, we offer bulk discounts if you order multiple of 10 (box) or 500 (pallet).
Irgendeine Frage?
Wenn wir Ihre Frage noch nicht beantwortet haben, können Sie uns unten kontaktieren und wir werden uns so schnell wie möglich bei Ihnen melden.